Acti9 Reflex iC60 Series - Schneider Electric
The Acti9 Reflex iC60 is a miniature circuit breaker with control built into it. You do not need a separate remote control block. A PLC or building system can switch the breaker on and off, and it can read the breaker status back. The connection goes through the Ti24 interface, which links directly to a PLC or to Acti9 Smartlink with ready made cables. Under the control layer it is still an iC60 breaker, so it gives the same overload and short circuit protection and the same isolation. This makes it a smart choice for circuits that are switched often, such as lighting, heating and ventilation. LEDs on the front show if the device is on, tripped, ready or overheating. It can be controlled by pulse or by a maintained command.
- At Sensato Trade you get original Schneider Electric products with delivery across Pakistan. If you want to explore more options in this Acti9 Reflex iC60 Series, visit Sensato Trade platform.
Acti9 Reflex iC60 Series - Features
- Built-in control: switch on and off from a PLC without extra modules
- Two control modes: pulse or maintained command
- Status LEDs: green for ON, flashing for ready, tripped or overheat, red for fault
- Ti24 interface: direct link to a PLC or Acti9 Smartlink
- Integrated padlocking: safer maintenance
Acti9 Reflex iC60 Series - Technical Specifications
- Range: Acti9 Reflex iC60 (iC60N and iC60H versions)
- Poles: 2P, 3P and 4P
- Rated current: 10A to 40A on listed models (10A, 16A, 25A, 40A)
- Curves: B and C on listed models
- Control voltage (Uc): 24V DC and 48V DC (other control voltages listed on some codes)
- Electrical life: 50,000 cycles (AC-1). Mechanical life: 50,000 cycles
- Size: 81mm (2P), 99mm (3P) or 117mm (4P) wide, 84mm high, 77mm deep
- Protection: IP20
- Example breaking capacity, Reflex iC60H 4P: 30kA at 220 to 240V and 15kA at 380 to 415V
Acti9 Reflex iC60 Series - Compatibility and Installation Guide
- Works with PLCs and Acti9 Smartlink through Ti24
- The iMDU module adapts 24 to 48V AC or DC control voltages
- Accepts Vigi iC60 earth leakage blocks, terminal shields and padlocking devices
- Isolate the supply before fitting
- Wire the Ti24 control cable and set the operating mode with the front button
- Test local and remote control before putting the board into service
- Installation should be done by a qualified electrician
Frequently Asked Questions
Q1: Does it still protect the circuit?
Yes. It works as a normal iC60 breaker.
Q2: What do I need to control it?
A PLC or control system that can send a 24V or 48V command through Ti24.
Q3: How many times can it be switched?
Up to 50,000 cycles.
Q4: Can I use it instead of a contactor?
For many circuits, yes. Check the switching rate and the load type first.
Get Exclusive Discounts !
📌- Follow us on Instagram for exciting offers and Promotions.
📌- Like our Facebook Page to know our latest products.
🔗- Ready to shop smart? Download Sensato Trade App now for exclusive Deals order anytime anywhere easily
