Schneider Electric TeSys Deca Contactor LC1DT80AN7 (4P 80A 415V Coil)
The Schneider Electric TeSys Deca LC1DT80AN7 is a 4 pole contactor for resistive loads. All four power poles are normally open, and the contactor carries 80A in AC-1 duty at up to 440V. AC-1 duty is used for loads with little or no inductance, such as heaters, so it is a common pick for heating banks and lighting panels. The coil runs on 415V AC at 50/60Hz. Built-in auxiliary contacts, 1NO and 1NC, are included, and the NC contact is mirror certified for safety circuits. Power cables connect to EverLink BTR screw terminals and control wires go to screw clamp terminals. The contactor can switch up to 3600 cycles per hour in ambient temperatures of up to 60°C. It is 70mm wide, and you can mount it on a DIN rail or with screws. It is certified to IEC, UL, CSA, CCC, EAC and Marine standards.
Schneider Electric TeSys Deca Contactor - Features
- 4 normally open power poles
- 80A rating for resistive loads (AC-1)
- Built-in auxiliary contacts: 1NO + 1NC (NC mirror certified)
- Operating rate up to 3600 cycles per hour
- Multi standards certified
Schneider Electric TeSys Deca Contactor - Technical Specifications
- Range: TeSys Deca (LC1D)
- Product type: Contactor
- Poles: 4P (4 NO)
- Utilisation category: AC-1
- Coil: 415V AC, 50/60Hz, without built-in suppressor
- Rated impulse withstand voltage (Uimp): 6kV
- Certifications: IEC, UL, CSA, CCC, EAC and Marine
Schneider Electric TeSys Deca Contactor - Rated Current and Voltage
- Rated operational current: 80A at up to 440V AC (AC-1, below 60°C)
- Power circuit voltage: up to 690V AC (25 to 400Hz) or up to 300V DC
- Signalling circuit thermal current: 10A
Schneider Electric TeSys Deca Contactor - Size and Mounting
- Width: 70mm
- Mounting: DIN rail or screw fixing
- Power connection: EverLink BTR screw terminals
- Control connection: screw clamp terminals
- Operating environment: up to 60°C
Schneider Electric TeSys Deca Contactor - Compatibility
- Suppressor module for LC1D40A to D80A and LC1DT60A to DT80A
- Mechanical interlock for LC1D40A to D80A and LC1DT60A to DT80A
- TeSys Deca auxiliary contact blocks
Installation Usage or Safety
- Isolate the power before fitting
- Mount the contactor on a DIN rail or with screws
- Wire the 415V coil and the control circuit
- Connect the power cables and tighten the terminals fully
- Do not use it for motors. It is rated for resistive AC-1 loads
Where to Use This
- Electric heater banks and ovens
- Lighting and resistive load panels
- Industrial and commercial switching
Package Includes
- 1x TeSys Deca contactor LC1DT80AN7
Why Buy From Sensato Trade
- You get the original Schneider Electric part. The part you receive is genuine and fully compatible.
- You get customer support that is ready to help if you are not sure about compatibility or have any other questions about the product.
- Fast and secure delivery is available, across Pakistan.
- Sensato Trade is a seller who truly understands industrial parts.
- We offer a refunds and returns policy if the product does not match your needs or if there is a compatibility issue.
Frequently Asked Questions
Q1: What coil voltage does it use?
415V AC at 50/60Hz.
Q2: Can I use it for motors?
It is rated for resistive loads in AC-1 use a 3 pole LC1D contactor for motor starters.
Q3: Does it have auxiliary contacts?
Yes, 1NO and 1NC are built in.
Get Exclusive Discounts !
📌- Follow us on Instagram for exciting offers and Promotions.
📌- Like our Facebook Page to know our latest products.
🔗- Ready to shop smart? Download Sensato Trade App now for exclusive Deals order anytime anywhere easily
