Schneider Acti9 PowerTag Energy Series - Wireless Energy Sensors

The Acti9 PowerTag Energy is a series of small wireless sensors that measure electrical energy inside a distribution board. Each sensor fits directly on a circuit breaker, so you can monitor one circuit at a time without cutting wires. It measures active energy, active power, current, voltage and power factor, with class 1 accuracy under IEC 61557-12. The 63A models include 1P+N and 3P+N versions that mount on the top or the bottom of the device, and a flex model for 3P devices. The sensors send data wirelessly to a concentrator or gateway, such as Acti9 Smartlink, PowerTag Link or EcoStruxure Panel Server. This gives you live data for cost allocation, load monitoring and energy saving. If power fails, the sensor sends a voltage loss alarm with the current for each phase.

-> At Sensato Trade you get original Schneider Electric products with delivery across Pakistan. If you want to explore more options in this Acti9 PowerTag Energy Series, visit Sensato Trade platform.

Schneider Acti9 PowerTag Energy Series - Features

• Wireless data: no extra wiring for each meter
• Class 1 accuracy: class 1 for current, power and energy, class 0.5 for voltage
• Five measurements: energy, power, current, voltage and power factor
• Voltage loss alarm: sent with the current measured at that moment
• Several formats: 1P+N, 3P+N top and bottom, and a 3P flex model

Schneider Acti9 PowerTag Energy Series - Technical Specifications

• Range: PowerLogic PowerTag Energy (PowerTag A9 M63)
• Maximum current (Imax): 63A, basic current 10A, starting current 40mA, saturation current 130A
• Rated voltage: 220 to 240V phase to neutral, 380 to 415V phase to phase, plus or minus 20%
• Power use: 2VA or less. Protection: IP20 and IK05
• Operating temperature: -25°C to 60°C
• Standard: IEC 61557-12 (PMD-I/DD/K55/1)
• Examples: A9MEM1521 (1P+N top), A9MEM1541 (3P+N top), A9MEM1542 (3P+N bottom), A9MEM1573 (F63 3P, top or bottom)

Schneider Acti9 PowerTag Energy Series - Compatibility and Installation Guide

• Fits Acti9 and Multi9 Monoconnect devices with 18mm pitch, up to 63A
• Works with Acti9 iC60 (single terminal), iID, iK60, iKQ, Reflex iC60, iC65, DT60 and iKQE RCBO
• Needs a gateway: Acti9 Smartlink SI B or SI D, PowerTag Link, Link HD or Link C, Wiser IP module, EcoStruxure Panel Server or PrismaSet Active
• Isolate the supply before fitting and choose the top or bottom model that matches your layout
• Pair the sensor with your gateway and check the readings
• Installation should be done by a qualified electrician

Frequently Asked Questions

Q1: Can I use it without a gateway?
No. A concentrator or gateway collects the wireless data.

Q2: Does it need a battery?
No. It takes its power from the circuit, using 2VA at most.

Q3: What is the difference between top and bottom models?
They mount on different sides of the breaker. Pick the one that matches your board layout.

Q4: What happens in a power cut?
It sends a voltage loss alarm with the current per phase.

Get Exclusive Discounts ! 

📌- Follow us on Instagram for exciting offers and Promotions.
📌- Like our Facebook Page to know our latest products.
🔗- Ready to shop smart? Download Sensato Trade App now for exclusive Deals order anytime anywhere easily